Creatbot PEEK-300 2nd Generation Ultra High Temperature PEEK ULTEM 3D Printer

Roll over image to zoom in Click on image to zoom

CREATBOT PEEK-300 2ND GENERATION ULTRA HIGH PERFORMANCE HIGH TEMPERATURE PEEK ULTEM 3D PRINTER

Ultra high temp. nozzle/bed
Advanced Thermal System
Direct Annealing System
Water Cooling/ Heat Isolation System
Medical/ Industry Application

Direct Annealing Temperature: 0-400°C

Direct Annealing System (DAS), the world's first and extraordinary technology by CreatBot. Annealing process is instant controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size functional materials. (The technology is patent protected and available by CreatBot only)

Smart Auto-rising dual extruders 500 ℃

The PEEK-300 equiped with CreatBots new technology smart Auto-rising dual extruders. Water cooling, DAS system, Auto-rising extruders. The dual nozzle temperature up to 500°C. You can print any 3D printer materials in the world.

Hotbed 200 ℃

Common but necessary.
Base of printing big models with no warping.

Hot Chamber 120°C

Outstanding and important.
The protector of no cracking printing.

Triple Heat Isolation

Triple heat isolation is made of double insulation chamber, advanced insulation materials and vacuum double PC boards. It is guarantee of ultra performance and safety.

Cooling System

Cooling system is one of the important parts to constitute the whole thermal system. It is made of
(1) liquid cooling. Circulating liquid can be used effectively for a long time.
(2) Air pump cooling. Air pump provide cold air from outside instead of hot air inside chamber.

HEPA Air Filtration

The air filter system can absorb impurities and gases that are generated by printing special filament, safer and

more environmental protection which is more suitable for houses, schools, and office spaces.

Resolution 0.04mm

0.04mm is an available resolution for normal plastics, but it is an extraordinary resolution for high warping and high deformation materials. 3D printing high performance material need not only high temperature, but better cooling. For high resolution with high small details, high temperature will ruin layers to a mess if heat and cooling are not in a balance.

Material Performance Comparison Chart

Printing
Build Volume	Single Extrusion: 300300400 mm Dual Extrusion: 240300400 mm
Filament Diameter	1.75mm
Number of Nozzles	Dual Extruder
Print Speed	10-150mm/s
Nozzle Diameter	0.4mm (0.3~1.0mm optional)
Filament Compatibility	Engineering Plastics: PLA, ABS, ASA, PC, Nylon, PETG, PVDF,TPU,Carbon Fiber； High temperature Material: UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEI(ULTEM)； Ultra-performance material: PEEK,CF-PEEK (Carbon fiber), GF-PEEK (glass fiber), PEKK, etc.

Software
Software	Creatware, Simplify3D, Cura, Slic3r
Operating Systems	Win7/8/10
Print File Type	STL, OBJ, AMF, Gcode

Special Function
Outage Restored	Save data when power is off
Filament Detection	Pause printing when filament runs out
Direct Annealing System (DAS)	Annealing process is instantly controllable during printing. It aims to provide best quality parts in one time without warping and cracking printing of big size, functional materials.
Heat insulation	Triple heat insulation
Emergency stop switch	Support emergency stop
High temperature accessories	High temperature resistance motors, linear rails, belts and circuits to ensure long high temperature printing.

Temperature
Nozzle Max. Temperature	500℃
Chamber Temperature	120℃
Platform Max. Temperature	200℃
Direct Annealing Temperature	0~400℃

Mechanical
Cooling	Air pump cooling & water cooling
Platform	PCB aluminum + PEEK print board
Positioning Precision	X Y axis 0.0127mm, Z axis 0.00125mm
Extruder	Directly Drive
Machine Construction	Fully enclosed hot chamber
Bed Leveling	Manually/Automatic